StickyLens adds spherical vision support to compatible sunglasses, sports glasses, goggles, and masks without permanent adhesive. Choose the power for each eye, apply with a thin layer of water, and move the same pair between frames.
How to choose your power
Use the spherical (SPH) value from your prescription for each eye. Negative powers (−0.50 to −6.00) support distance vision. Positive powers (+0.50 to +6.00) support reading and close work. Pick "Optician Assistance" if you are unsure and we will confirm your power by email before shipping.
Apply in four steps
-
Clean – Wash and dry the inside of your eyewear.
-
Add water – Add a few drops where the lens will sit.
-
Position – Center the lens in front of your pupil.
-
Press & dry – Press out air and excess water, then wipe dry.
Material & care
Made from soft, transparent silicone that flexes against a compatible inner lens surface. Rinse with clean water after use, add mild soap when needed, and dry with a soft lint-free cloth. Reusable: lift, rinse, dry, and store in the case between uses.
Please note
StickyLens supports spherical (SPH) powers only. It does not correct CYL/astigmatism, prism, or other prescription parameters, and is not a substitute for certified safety lenses or professional eye care. Measure the available flat area before ordering, especially for compact goggles or strongly curved lenses. Trimming is not recommended.